Dunster House Ltd.
Est. 1994
Fully pressure treated
All of the timber for this shed is pressure treated with the only exception being the MFP sheets. So unlike others, even the framework is pressure treated to ensure it lasts. All of our pressure treated timber do not need treatment for years against fungal decay and insect infestation, so there is any need for the customer to apply treatment during this time.
Easy to build Panel System
Made using a panel system our Premium Sheds are easy to assemble. We even supply the roof as one piece with hinges at the apex to allow you to just fold it out and fix to the top of the wall panels.
No Glued together Offcuts
We only use full lengths of timber in our garden buildings - we don't glue separate offcut pieces together with finger joints. Not only are they stronger, but they look much better too.
Specification
External Width: 1.2m (3' 11")
External Depth: 0.6m (1' 11")
Ridge Height: 1.478m (4' 10")
Internal Eaves Height Front: 1.168m (3' 9")
Internal Eaves Height Back: 1.435m (4' 8")
Door Opening Size: 0.550m x 1.056m (1' 9" x 3' 5")
Wall Thickness: 12.5mm Shiplap
Internal Width: 1.2m (3' 11")
Internal Depth: 0.57m (1' 10")
Approx. DIY Assembly Time: 1 - 2 Days*
*This is an approximate time only, based on 2 people. Assembly time may vary depending on season/weather conditions, foundation type, ability of those constructing, etc.
Please Note:

All fixings needed for assembly are supplied

Please Note:

All wood is planed, pre-cut (with the exception of trims), and pre-notched for quick and easy construction.

Please Note:

All Sizes are Approximate