Dunster House Ltd.
Est. 1994
Fully pressure treated
By pressure treating our floor bearers we protect the lowest part of the building from rot and insect infestation, meaning they will last a lot longer than untreated timber bearers.
Extra Strong Posts
We use slow grown spruce less likely to shrink, warp or split. We only select slowly grown timber from colder climates, which helps keep the timber more stable as the rings are densely packed.
Easy to Assemble Panel Roof
Our solid wood roof is made out of sturdy 15mm ready-assembled shiplap timber panels. With this system the construction time is shortened and the build up process becomes easier.
Tall walkthrough height
Our Gazebos have a tall walkthrough height of 1840mm or over to minimise the chances of bumping your head.
Fixings Included
We include all the screws, bolts, nails and other fixings needed to put the garden building together. There is no need to worry about what sort of bolts, nails,.. are needed, as the right fixing for the job is included in the kit.
No Glued together Offcuts
We only use full lengths of timber in our garden buildings - we don not glue separate offcut pieces together with finger joints. Not only are they stronger, but they look much better too.
Strong Roof
Our heavy duty 19mm thick roof provides the perfect protection from the outdoor elements and provides the perfect cover for the garden furniture.
Quick Assembly
Our Venetian Pavilion is easy to assemble as not only are all parts pre-cut (except minor trims), we also supply the roof supports pre-cut to support each of the roof timbers at the required angle, so that fitting these is a breeze. This will enable to build the gazebo in just a couple of hours in between two people.
Galvanised Steel Fixing Plates
We want the Gazebo to last and be strong, so we provide hot dipped galvanised steel fixings for the bottom of each post to fix the gazebo to the base (generally concrete pads or decking).
Perspex Dome
Our unique Perspex dome that sits at the top of the Gazebo is fixed in a way that allows ventilation to help prevent condensation forming on the dome. It is made from Polyester Terephthalate Glycol which not only is strong, but also safe, as it is shatter proof.
Specification
External Width: 2.5m (8' 2")
External Width (walls): 2.3m (7' 6")
External Depth: 2.5m (8' 2")
External Depth (walls): 2.3m (7' 6")
Overall Height: 2.52m (8' 3")
Internal Eaves Height: 1.94m (6' 4")
Timber: Spruce
Uprights: 70mm x 70mm
Perspex Dome: 814mm x 814mm
Foot Pad:

Zinc Plated Steel

Guarantee:

10 Years on Pressure Treated Timber against Rot and Insect Infestation

Approx. DIY Assembly Time: 1 - 2 Days*
*This is an approximate time only, based on 2 people. Assembly time may vary depending on season/weather conditions, foundation type, ability of those constructing, etc.
Please Note:

All fixings needed for assembly are supplied

Please Note:

All Sizes are Approximate

Please Note:

All wood is pre-cut (with the exception of trims) for quick and easy construction.