Dunster House Ltd.
Est. 1994
Fully pressure treated
By pressure treating our floor bearers we protect the lowest part of the building from rot and insect infestation, meaning they will last a lot longer than untreated timber bearers.
Tall walkthrough height
Our Gazebos have a tall walkthrough height of 1840mm or over to minimise the chances of bumping your head.
Fixings Included
We include all the screws, bolts, nails and other fixings needed to put the garden building together. There is no need to worry about what sort of bolts, nails,.. are needed, as the right fixing for the job is included in the kit.
No Glued together Offcuts
We only use full lengths of timber in our garden buildings - we don not glue separate offcut pieces together with finger joints. Not only are they stronger, but they look much better too.
Galvanised Steel Fixing Plates
We want the Gazebo to last and be strong, so we provide hot dipped galvanised steel fixings for the bottom of each post to fix the gazebo to the base (generally concrete pads or decking).
Perspex Dome
Our unique Perspex dome that sits at the top of the Gazebo is fixed in a way that allows ventilation to help prevent condensation forming on the dome. It is made from Polyester Terephthalate Glycol which not only is strong, but also safe, as it is shatter proof.
Specification
Please Note:

All Sizes are Approximate

External Width: 2.50m (8' 2")
External Depth: 2.50m (8' 2")
Roof: 19mm Tongue & Groove Boards
Overall Height: 2.52m (8' 3")
Internal Eaves Height: 1.94m (6' 4")
Walkthrough Height: 1.90m (6' 2")
Timber: Spruce
Perspex Dome: 814mm x 814mm
Uprights: 70mm x 70mm
Approx. DIY Assembly Time: 1-2 Days*
*This is an approximate time only, based on 2 people. Assembly time may vary depending on season/weather conditions, foundation type, ability of those constructing, etc.
Foot Pad:

Zinc Plated Steel

Please Note:

All fixings needed for assembly are supplied

Please Note:

All wood is pre-cut (with the exception of trims) for quick and easy construction.